— Industrial LED Lighting —

High Mast Light Pole

High mast lighting systems configured for large-area applications with project-specific mast height, raising and lowering equipment, luminaire arrangement, structural design, corrosion protection, and maintenance access.

15–50m Height Options

High mast configurations for ports, airports, highways, yards and sports facilities

Raising & Lowering System

Motorized winch lowers the luminaire carriage for safer ground-level maintenance

Structural & Wind-load Design

Mast shaft, foundation and fixture loads engineered to project requirements

Custom Luminaire Arrangement

Fixture quantity, power, optics, aiming and controls configured by lighting design

— Product Overview

Purpose-Built for Mission-Critical Infrastructure

The YLDG-M series can be configured for large-area sites such as highway interchanges and container ports. Mast height, luminaire arrangement, lifting system and maintenance access are reviewed against the approved lighting and structural design.

Parameter

Value

Core Mechanism

Motorized Lifting & Lowering System

The YLDG-M raising-and-lowering option uses a motorized winch, wire rope and pulley arrangement to bring the luminaire carriage down for inspection and maintenance. Motor rating, cable specification, locking devices and operating procedure are confirmed for the selected project design. Ground-level access can reduce reliance on elevated work equipment, subject to site conditions and the approved maintenance procedure.

1.5 kW three-phase motor with thermal overload protection
316 stainless steel wire rope, 8mm diameter, 6×19 construction
Automatic mechanical brake engages on power failure
Guide rollers prevent cable tangling during operation
Lowering speed: 3 meters per minute (controlled descent)
Manual override hand-crank for emergency operation
Carriage locking mechanism at operating position
Maintenance cycle: < 30 minutes for full lowering and raising

Light Source

High-Power LED Luminaire Module

The YLDG-M luminaire carriage can be configured with multiple independently aimed LED floodlight modules. Fixture count, lumen output, optical distribution and replacement access depend on the selected luminaires and approved lighting design.

Luminaire quantity, wattage, weight, and total EPA confirmed for the approved lighting design
System efficacy confirmed from the selected luminaire data sheet and test documentation
CCT and CRI selected according to the application and project specification
Rated life and lumen maintenance confirmed for the selected luminaire model
Optical distribution and aiming angles determined by project-specific photometric calculations
Housing material and thermal design confirmed from the luminaire manufacturer’s documentation
Lens, sealing, and UV-resistance requirements specified for the installation environment
Surge protection coordinated with the electrical system and local exposure conditions

Structural Integrity

Pole Shaft & Foundation System

The tapered polygonal pole shaft is fabricated from high-strength Q345B steel plate, seam-welded and hot-dip galvanized for corrosion protection. The multi-section design with flanged connections supports transport and on-site assembly.

Applications

Deployed Where Scale Meets Safety

The YLDG-M series is designed for large open areas that need project-specific high-mast lighting. Mast spacing, fixture count and aiming should be established by photometric calculations and the approved site layout.

Airports & Runways

High mast lighting can be configured for airport aprons, cargo areas and access roads. Required illuminance, uniformity and glare limits must be checked against the applicable airport and project specifications.

Highway Interchanges

For grade-separated intersections and toll plazas, mast locations, fixture optics and aiming are selected through site-specific photometric calculations to address coverage and uniformity.

Ports & Yards

Container terminals, logistics yards and rail facilities may use high mast systems where broad-area lighting, maintenance access and operational requirements are defined in the project brief.

Sports & Events

Stadium perimeters, training fields and outdoor event areas may require high-mounted floodlights. Glare, spill light and target illuminance should be assessed in the lighting design.

Container Port Lighting Configuration

For container terminals and logistics yards, mast spacing, mounting height, luminaire aiming, required illuminance and energy use should be checked against the project's lighting calculations and approved equipment schedule. Request project drawings and verified performance data for any specific installation.

High Mast Light Pole FAQs

What is a raising and lowering high mast system?

A motorized winch, wire-rope and pulley assembly lowers the luminaire carriage to ground level for inspection and maintenance. This can reduce dependence on cranes or high-access vehicles when the system is operated under the approved maintenance procedure.

Where are high mast lighting systems used?

Common applications include ports, airports, highway interchanges, logistics yards, large parking areas and sports facilities. For lower mounting heights or localized area lighting, compare our flood light poles and street light poles.

What information is needed for a high mast quotation?

Provide the project location, required mounting height, design wind speed, target illuminance, site dimensions, luminaire preference, power supply, control requirements and applicable standards. Photometric and structural calculations should be completed for the final configuration.

How should high mast systems be maintained?

Recommended inspections include the winch, wire rope, pulleys, mechanical locking system, electrical connections, luminaires, access door, fasteners and corrosion protection. Maintenance intervals should follow the approved design, local regulations and site operating conditions.

Your Reliable Manufacturing Partner

Our Service

Applications of Our Custom Light Poles

Submit Your Request To Us